Tufted headboards are upholstered headboards, which has buttons sewn on them regularly, making the headboard see extra cushion and luxurious. While commercially available tufted headboards are practical, they are not cheap. How do tufted headboards, divide the height of the plywood into three, and draw a horizontal line across the headboard on each point. Divide the length of the headboard with eight, and draw a vertical line down the headboard at each point there should be three horizontal and eight vertical lines that intersect junction is where each button can get. Drill a small hole through each track only big enough for upholstery needle to go through.
How do tufted headboards, spray plywood with spray glue, and then put foam over the top of the plywood to match up the edges exactly. Use electric knife to trim any overlap, and that the sides of the foam right. Place batting down on a flat surface, then place the headboard, foam down the center of the batting. Pull the sides of batting up and over the headboard, stapling it down on the back of the headboard with the stapler. Start from the center of each side and work your way outward, a staple every 2 inches or so.
12 Photos Gallery of: How Do Tufted Headboard Ideas
After that to do tufted headboards, place the fabric onto the flat surface, wrong side up. Place the headboard on the fabric, batting down and secure the fabric in the same way as you did the batting, making sure that the drug is evenly drawn nice and tight. Partial hammer a staple right next to each drill hole in the back of the plywood.